40oz Tumbler with Handle

40oz MakerTwist™ Tumbler with Handle

The MakerTwist™ 40oz Tumbler with Handle is a laser-ready powder-coated 304 stainless steel tumbler system built for custom drinkware production. It is designed for laser engraving and also supports UV printing, UV DTF, and epoxy customization. It includes a removable MakerTwist™ handle, leak-proof lid, matching straw, and gift-ready packaging for personalization, resale, and branded merchandise.

Each 40oz MakerTwist™ Tumbler with Handle includes:

• 40 oz powder-coated MakerTwist™ tumbler
• Matching twist-on ambidextrous handle
• Leak-proof screw-on lid with slide closure
• Matching silicone straw
• Tumbler care card
• Matching window gift box

The tumbler and packaging are logo-free and ready for personalization, gifting, resale, or custom branding.

What is MakerTwist™?

MakerTwist™ is MakerFlo's removable handle system, designed specifically for custom drinkware production. The handle twists on after laser engraving or decoration, giving makers full access to the tumbler's seamless surface during production. The result is faster customization, uninterrupted full-wrap designs, and a finished tumbler with a secure, factory-installed appearance.

Product Fact Sheet

• System: MakerTwist™
• Capacity: 40 oz
• Material: 304 stainless steel
• Finish: Satin powder coated
• Available colors: 10
• Construction: Seamless exterior
• Insulation: Double-wall vacuum insulated
• Temperature performance: Cold up to 24 hours; warm up to 4 hours
• Primary decoration method: Laser engraving
• Additional decoration methods: UV printing, UV DTF, epoxy
• Engraving result: Stainless steel reveal
• Packaging: Window gift box included
• Best for: Laser engraving businesses, UV print shops, Etsy sellers, ecommerce shops, corporate gifting, promotional products, and custom drinkware businesses
• Logo-free: Yes
• Accessories included: Twist-on handle, leak-proof lid, silicone straw, care card, window gift box
• Customization workflow: Decorate first, attach handle second

Powder Coated for Laser Engraving

The satin powder-coated finish is engineered for laser engraving, revealing crisp stainless steel contrast for names, logos, artwork, and full-wrap designs. The seamless exterior also supports UV printing, UV DTF, and epoxy decoration.

This tumbler can be customized with:

• Laser engraving
• UV printing
• UV DTF
• Epoxy

Starting-point laser settings are available to help makers reduce setup time and dial in consistent results.

MakerTwist™ System 

The included MakerTwist™ handle twists on after customization, so makers can engrave or decorate the tumbler body first, then attach the handle before packaging.

The ambidextrous double-thread design lets the finished tumbler be used with the handle facing either direction, and the tumbler can also be used without the handle.

Built for Business

• Faster production workflow
• Consistent engraving results
• Gift-ready presentation
• Designed for personalization, resale, and branded merchandise

This system is designed to help makers create personalized drinkware with consistent engraving results, efficient assembly, gift-ready packaging, and a finished product that is ready to sell.

Use it for:

• Personalized name tumblers
• Corporate gifts
• Promotional drinkware
• Branded merchandise
• Event gifts
• Retail bundles
• Full-wrap engraved designs
• Custom ecommerce products

Bulk Ordering

MakerFlo offers bulk pricing and quantity discounts when you order 25+ units, full cases, or 25+ cases.

Maker Resources 

• Laser engraving settings
• Product sheets - free download
• Sales Tools

These instructions are for MakerTwist™️ Tumblers

• Perfectly align artwork to your tumbler every time
  
• Use for laser engraving, UV printing or UV DTF
• This method works on all MakerTwist sizes: 20oz Skinny, 20oz Classic, 30oz & 40oz

Step 1 Secure the Lid 

Ensure the lid is fully tightened until it naturally stops. Do not over-tighten. Do this without the handle so you are able to mark and engrave. The diagram shows that when twisted on, the handle will sit at 90° from the lid tab and sip spout.

Step 2 Select Your Center Point 

Use the lid tab or sip spout as your center point alignment reference for your artwork. These reference points are factory-aligned for consistent positioning. 

Step 3 Position Your Artwork

Center align your artwork to your selected center point (the lid tab or sip spout). Mark with a pencil if removing the lid to engrave or personalize.

Step 4 Engrave & Clean 

Complete your engraving, then clean the tumbler using Dawn Powerwash® or LA's Totally Awesome® with a microfiber cloth. Your design is aligned with the lid. 

Step 5 Add the MakerTwist™️ Handle  

MakerTwist™ handles are engineered to install in the same position on compatible MakerTwist™️ tumblers every time — centered between the MakerTwist™️ tumbler lid tab and sip spout. After cleaning, screw on the lid with handle until they naturally stop. Your artwork will be perfectly aligned with the MakerTwist™️ handle every time.

2 Day Order Processing 
All orders are processed and shipped within 2 business days. Weekend or holiday orders will begin processing the next business day.  Processing times may increase during peak seasons. Same day processing is available for $10 and guarantees your order will ship within 24 business hours of being received.

Same Day Processing - $10
For $10, we offer priority fulfillment to ship your order the same day if requested by 3pm AZ Time. Orders placed after 3pm AZ Time will ship the following day. Same Day Processing fee does not include expedited shipping.

Shipping
All rates - Continental USA (Contiguous 48)
• $15.95 when spending $0-$98.99
• Free when spending $99+ (does not include UV DTF & DTF orders)
• UV DTF & DTF orders ship separately at $6.99, or free when order is over $75+
• Expedited shipping options available at checkout

Alaska, Hawaii, Territories & Military
Price will be calculated at checkout based on your location. These orders are typically only shipped via USPS. 

 

International Shipping
Shipping & duty will be calculated at checkout based on your location. Customs clearance, taxes and duty charges are included in the calculated rate.

Track Your Shipment
A shipment confirmation with tracking information will be sent to your email once the package has been scanned in by the carrier. Oftentimes the packages are scanned late at night.
 
 
Local Pickup
Free! We are located at 6100 W Gila Springs Place Suite 13 Chandler, AZ 85226, Open hours are M-F 9AM-5PM. Customers will receive an email once the order is ready for pickup.

Returns Policy (learn more)

• 30-Day Return Policy: Request a return within 30 days of receiving your item.

• Return Conditions:

  • Item must be unused, in original condition, with tags and packaging.
  • A 15% restocking fee applies to unused equipment (e.g., printers, machines).
    
  • Return shipping will be incurred by the buyer, unless the items were incorrect or arrived damaged.
  • The 30-day return window starts on the date the tracking number shows status as delivered.