Flopoxy Fast Set Epoxy + Hardener

Flopoxy Fast Set Epoxy Resin & Hardener Kit

***THIS PRODUCT CANNOT BE SHIPPED INTERNATIONALLY.  ANY INTERNATIONAL ORDERS CONTAINING THIS ITEM ARE SUBJECT TO BE CANCELLED AND REFUNDED***

Click HERE to download the Safety Data Sheet Part A Part B

Kit Sizes

Part A = Fast Set Resin, Part B = Fast Set Hardener, mixing ratio 1:1

• 16oz Kit = 8oz A + 8oz B
• 0.5 Gallon Kit = 32oz A + 32oz B
• 1 Gallon Kit = 0.5 gal. A + 0.5 gal. B
• 2 Gallon Kit = 1 gal. A + 1 gal. B

Epoxy Resin & Hardener Specifications

• Ideal Curing Temp: 65-80 F
• Mixing Time: Approximately 3-4 minutes (depending on amount being mixed, as well as how thoroughly it is being stirred) 
• Working Time: 15 minutes
• Dry-to-touch: 2.5-4 hours
• Full Cure: 24 hrs
• Heat Tolerance: 500 Degrees Fahrenheit
• Maximum recommended coating thickness: 1/8”
• Maximum recommended casting thickness: ½” – even ¾” as long as total mass of pour is small
• Shore D Hardness: 80D

Safety

First things first!  ALWAYS observe these basic safety requirements.

1. We advise using a Respirator to protect your lungs.
2. Craft in a well ventilated room to protect yourself and others
3. Use gloves!  It is important to not expose yourself or your lungs to the epoxy.
4. Use Safety Eye Goggles, it is important to keep your eyes and face protected from the epoxy.

(Constant exposure can cause reactions to your skin or may make you allergic to the epoxy)

FDA Food Safe Rating

The Flopoxy product combination was tested by an independent laboratory and was found to comply with 21 CFR 175.300 (as published in the Code of Federal Regulations) for resinous and polymeric coatings that may be safely used as the food-contact surface of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food when accurately measured, thoroughly mixed, and fully cured.

Prior to using accurately measured, thoroughly mixed, and fully cured epoxy-coated objects for food applications, thoroughly wash the surface with a water and dishwashing detergent solution, rinse, and allow to dry. 

Flopoxy Fast Set Epoxy Two Part Kit - FAQ

Q- Is MakerFlo epoxy self leveling and self healing?

A- Yes! MakerFlo epoxy resin is self-leveling, ensuring a smooth, even finish on flat and curved surfaces without excessive manipulation. When working with circular objects like stainless steel tumblers or resin ornaments, the epoxy naturally flows to create a seamless coat. However, due to the curved shape, excess epoxy may pool or drip at the bottom if too much is applied. To achieve a professional, even finish:

Rotate continuously (use a cup turner for tumblers).
Apply in thin layers to prevent sagging or uneven curing.
Check for drips and smooth them out before the resin fully sets.

While MakerFlo epoxy offers durability and a glossy finish, it is not self-healing like some urethane-based coatings. If scratched or dented after curing, it won’t automatically repair itself. However, you can sand and recoat the surface to restore its original shine.

Q- Is Flopoxy UV resistant?

A- Yes, it has stabilizers/ inhibitors for UV

Q- Does this product have a strong smell? 

A- It has very minimal to no smell once it's mixed, applied and cured.

Q- Can Flopoxy be used as a top coat?

A- Yes

Q- Does MakerFlo's two part epoxy need heat to cure?

A- No, Heat is not necessary to cure

Q- Is MakerFlo Flopoxy good for light colored cups? 

A- Yes

Q- What temp should my work space (room) be while working with two part epoxy? 

A- Between 65-80 degrees Fahrenheit

2 Day Order Processing 
All orders are processed and shipped within 2 business days. Weekend or holiday orders will begin processing the next business day.  Processing times may increase during peak seasons. Same day processing is available for $10 and guarantees your order will ship within 24 business hours of being received.

Same Day Processing - $10
For $10, we offer priority fulfillment to ship your order the same day if requested by 3pm AZ Time. Orders placed after 3pm AZ Time will ship the following day. Same Day Processing fee does not include expedited shipping.

Shipping
All rates - Continental USA (Contiguous 48)
• $15.95 when spending $0-$98.99
• Free when spending $99+ (does not include UV DTF & DTF orders)
• UV DTF & DTF orders ship separately at $6.99, or free when order is over $75+
• Expedited shipping options available at checkout

Alaska, Hawaii, Territories & Military
Price will be calculated at checkout based on your location. These orders are typically only shipped via USPS. 

 

International Shipping
Shipping & duty will be calculated at checkout based on your location. Customs clearance, taxes and duty charges are included in the calculated rate.

Track Your Shipment
A shipment confirmation with tracking information will be sent to your email once the package has been scanned in by the carrier. Oftentimes the packages are scanned late at night.
 
 
Local Pickup
Free! We are located at 6100 W Gila Springs Place Suite 13 Chandler, AZ 85226, Open hours are M-F 9AM-5PM. Customers will receive an email once the order is ready for pickup.

Returns Policy (learn more)

• 30-Day Return Policy: Request a return within 30 days of receiving your item.

• Return Conditions:

  • Item must be unused, in original condition, with tags and packaging.
  • A 15% restocking fee applies to unused equipment (e.g., printers, machines).
    
  • Return shipping will be incurred by the buyer, unless the items were incorrect or arrived damaged.
  • The 30-day return window starts on the date the tracking number shows status as delivered.